Zhongshi Zhihui Technology (suzhou) Co., Ltd.
Zhongshi Zhihui Technology (suzhou) Co., Ltd.
Add to Cart
Silver SZHUASHI 2.4GHz 2.4GHz Dual Frequency And Channel Signal Booster for Drone UAV
Description
The 2.4GHz+2.4GHz dual frequency bidirectional power amplifier is designed for IEEE 802.11b/g/n Wireless LAN applications. It adopts the direct sequence spread spectrum (DSSS) and orthogonal frequency division multiplexing (OFDM) technology of WAN communication. The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi devices and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate.
Key Features
20X the power, Improving the link quality and coverage of certified WLAN devices
Ultra-low noise, improve the receiving sensitivity, and extended receiving distance
Wide 6V to 16V operating input range
Working with certified IEEE 802.11b/g/n Wireless LAN devices
Simply plug and play, no software is required
Wide 6V to 16V operating input range
Operating mode is TDD, 2.4GHz or 5.8GHz are extensible
Simply plug and play, no software is required
All metal covering, improve heat dissipation
| Frequency Range: 2.4~2.5GHz | Operating Voltage: 6~16V |
| Transmission Gain: 13dB±1(2.4GHz) | Input Trigger Power: Min: 3dBm Max: 30dBm |
| Maximum Output Power (P1dB): 36dBm (4W) | EVM: 3%@28dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz |
| DC Supply Current: 435mA@Pout 28dBm 9V | Noise Figure: <2.5dB(2.4GHz) |
| TX/RX Switch Time Delay:<1us | LED Indicator: Transmitter: Green; Receiver: Red; Transducers: Orange |
| Operating Ambient Temperature: -40℃~+70℃ | Dimension: 76.5mm×66mm×13mm |
| Operating Humidity: <95%RH |
Installation Instructions
Step 1: Disconnect power supply to AP/Router;
Step 2: Detach the antenna from your certified wireless AP/Router
Step 3: Connect Rg316 cable to the booster and AP/Router
Step 4: Connect the antenna to the other end of the booster
Step 5: Connect the power supply to the booster first and subsequently the AP/Router
Always final Inspection before shipment;
1 year warranty for our products.